E-SATA01
 

External SATAII connector with 600mm cable
* 23.62" (600mm) cable length
* compatible with SATAII specification, can connect with front panel
* suitable for OEM project which needs to have eSATA function on front panel

1MINISAS-4SATAIICABLE
 

1 MiniSAS to 4-port SATAII cable
* 22.2" (565mm) cable length
* compatible with SATAII RAID architecture
* one Mini-SAS end connected to RAID controller card, four to SATAII hard drives

SW-SATACABLE
 

Infiniband switch 4-port SATA cable
* 17.7" (450mm) cable length between two heads
* compatible with 3ware's advanced switched RAID architecture
* compatible with SATA StorSwitch™ cabling solution
* compatible with all current SATA backplane inside of the chassis

11HD9CNT
 

90-degree HDD power extension connector
* one male head connected with original power supply source
* extended two 90-degree HDD connectors from the male head
* 220mm and 185mm long from male head
* good in use when the interior's room is limited

A3
 

HDD/FAN power extension connector
* one male head connected with original power supply source
* one 95mm HDD female connector from the male head
* two 290mm 3pin fan male extension wires from the male head
* good in use when the HDD power connector and fan wires in shortage

A4

HDD/FDD power connector
* one male head connected with original power supply source
* one 150mm HDD female connector from the male head
* two 300mm FDD connectors from the male head
* good in use when the HDD and FDD power connectors in shortage

525T35BK
 

5.25" to 3.5" bracket
* 5.25" drive space converting to 3.5" to mount HDD or FDD
* with 2 pieces as 1 pair (set)
* with TM3x6 mounting screws x 12pcs
* with galvanized color proceeded

2CDTO3HDDFIX-ASM

Two 5.25" to three 3.5" bracket
* two 5.25" drive space converting to three 3.5" HDD
* with 2 pieces as 1 pair (set)

3CDTO5HDDFIX-ASM
 

Three 5.25" to five 3.5" bracket
* three 5.25" drive space converting to five 3.5" HDD
* with 2 pieces as 1 pair (set)

system peripheral ordering data sheet